Curt Trailer Brake Controller Manual

Web just 5 steps to install brake controller and wiring! Main module can be mounted out of. Read, follow and save this guide for future reference. Switchable manual control brake light activation or no brake light.

Curt 51120 Discovery Electric Trailer Brake Controller, Timedelay

Manual control is used during initial setup and. Web the trailer brakes become more aggressive as the switch is moved toward the front of the tow vehicle. Web trailer brake control modules.

Brake Output Indicator Activate Manual Braking, Press And Hold The Orange Button.

Manual brake control activation is used during initial. At approximately 25 mph, apply the vehicle's brakes. Web you can adjust settings and use the echo® brake controller.

For Trailers With Two To Six Brakes.

Web provides automatic and manual trailer braking; Web learn how to properly install and use the curt 51170 spectrum brake controller with this detailed instruction manual. It only applies to the trailer brakes.

Switchable Manual Control Output, 100% Or Limited To Output Setting;

The sync adjustment has no effect on the manual control. For use with 12 volt negative ground systems only. Curt offers a full lineup of brake controllers for.

The Manual Control Only Applies Trailer Brakes.

Web venturer venturer brake control installation and user guide for use with 12 volt negative ground systems only for trailers with two to six brakes read,. Web curt discovery brake controller manual for use with 12 volt negative ground systems only for trailers with two to eight brakes read, follow and save this guide for future. Web brake controllers are essential for safe towing and allow the driver to apply the trailer brakes independently of the vehicle brakes.

Web Manual Control The Manual Control Is Located On The Front Of The Brake Control Unit At The Left Side.

Web manual control the manual control lever is located on the front left of the brake control unit. Web the manual control is located on the front of the brake control unit at the left side and only applies trailer brakes. Web starting with the output adjustment, drive forward on a dry and level paved or concrete surface.

Web Curt Venturer Brake Controller Manual.

Installing a brake controller involves disconnecting the vehicle battery, mounting the brake controller onto dash and plugging. A curt trailer brake control module is available for any job or budget. Discover how to install and operate this brake control module with our user manual.